|Model||Ultrasonic Level transmitters|
Two-wire ultrasonic transmitter which provides non-contact level measurement. The measurement range is up to 10m. The typical applications are hazardous bulk storage, day tank and sump.
It more suitable for challenging corrosive, waste water or slurry Media. It has integral display with push button module. It also provides fast and very simple calibration. This transmitter is also suited for sodium hypochlorite, waste water & resin.
|Measurement accuracy||Refer Catalogue|
|Measurement range||Refer Catalogue|
|Power supply||Refer Catalogue|
The general-purpose two-wire ultrasonic transmitter is non-contact type transmitter. It provides non-contact level detection up to 32’ or 10m. It is ideally preferred for challenging ultrapure, corrosive or waste liquids.
It also having push buttons which is calibrated. The transmitter is mostly selected for following applications i.e. atmospheric bulk storage, day tank and waste sump applications. Typical examples are wastewater and sodium hydroxide.
Multi Function Ultrasonic Level Transmitter delivers non-contact level detection. The detection range up to 9.8’ (2.5m). It also provides 4 SPST 60 VA 1A relays and two-wire 4-20 mA level measurement output. The construction of each relay on single set point alarm or latched on two sets for automatic fill. It may be empty in simplex or duplex control modes with fail-safe logic. The embedded controller can remove external control hardware.
|Pressure||30 psi / 2 bar|
|Power Supply||Refer Catalogue|
|Working temperature||Refer Catalogue|
The Ultrasonic level transmitter an innovative level sensor that replaces floats, conductance and pressure sensors. These all that fail due to dirty, sticking and scaling media. EchoPad provides continuous level measurement up to 49.2”(1.25m) or less. This provides 4-20mA signal output. It was configured via our free WebCal Software. This is non-contact type liquid level sensor.
It is mostly suited for corrosive, sticky or waste liquids. It also specifically selected for chemical feed, IBC or drum, skid or machine and cooling tower applications.