Manas Microsystems Private Limited

Series MEGA SROAT is offering large sized electromagnetic flow meters introduced by manas. The sizing ranges from 400mm diameter to 1600mm diameter. These flow meters are very accurate(Typically 0.5% of actual flowrate).

In this case the conductor is flowing media. The equation is as below:
E= B.V.D

Where

• E = Induced voltage [proportional to velocity]
• B =Magnetic flux density
• V =Mean velocity of the media
• D = Diameter of flow-sensor (distance between the sensing electrodes)

Principle Advantages:

• Robust, rugged, welded steel/stainless steel construction withstanding to IP68.
• Very much suitable for submerged or buried application.
• No Pressure Drop across the sensor, being full bore construction.
• Measurement independent of un-dissolved solids.
• Long lasting Ebonite rubber lining gives long life of sensor.
• End connection flanges as per customer's Requirements.
• Much better accuracy compared to other types of meters in its class.

Applications:

• Extremely useful for large water supply schemes.
• Suitable for Sewage measurements.
• Municipal water measurement schemes

Other Details:

• Diameter: DN400 to DN1000 (Higher Diameters on request)
• Body Material: SS 316/SS 304
• Coil Housing Material: SS304/SS316
• Flange Material: SS 316/SS 304

Specifications:

Description:

• Manas have now introduced a new type Smart Jal EC Flowmeter.
• Smart Jal EC meters are commonly used in Treated Effluent, Sewage water, Waste water etc.
• This type of flow meters also work on the Faraday’s Law of Electromagnetic Induction.

The Equation Is:

E= B.V.D

Where,

• E = Induced voltage [proportional to velocity]
• B = Magnetic flux density
• v = Mean velocity of the media
• d = Diameter of flow-sensor (distance between the sensing electrodes.)

 

Display:

• For Integral: 16X2 rows LCD Display For Instantaneous Flow Rate, Totaliser, Engineering Units, Fault messages.
• For Remote: 6 Digit, 0.3”, 7 segment LED for for Totalisation.
• 4 Digit, 0.5”, 7 segment LED for for Flow Rate Indication.
• Output: Pulse o/p α flow rate A] Pulse output open collector NPN OR B] 4 - 20mA dc, in max. 600 load, Isolated, Proportional to flow rate

Meter Size: DN32 to DN50

Manas have now introduced a new type of primary flow sensor & smart flow transmitter in their electromagnetic flow- meter series. This sensor works on the Faraday's law of electromagnetic induction. The meter is true volume measuring meter. The measurement is independent of Viscosity, Density, Dissolved/Un-dissolved solids, pressure or temperature of the flowing liquid as long as it maintains certain minimum conductivity. Various types of Liner & Electrode materials are available as per application requirements. The new sensors are more compact in size & more sensitive. Earth ring or earth electrode, both options are available. Empty tube detection is also provided.

Other Details:

• Meter: DN 10 to DN 350
• Flange Material: CS/SS 316/SS 304/SS 316 L
• Coil Housing Material: Carbon Steel PU Painted/SS 304/SS 316

Specifications:

Manas have now introduced a new type of primary flow sensor & smart flow transmitter in their electromagnetic flow- meter series. This sensor works on the Faraday's law of electromagnetic induction. The meter is true volume measuring meter. The measurement is independent of Viscosity. Density, Dissolved/Un-dissolved solids, pressure or temperature of the flowing liquid as long as it maintains certain minimum conductivity. Various types of Liner & Electrode materials are available as per application requirements. The new sensors are more compact in size & more sensitive. Earth ring or earth electrode, both options are available. Empty tube detection is also provided.  

Principle Of Operation 
The SROAT 1002 series electromagnetic flow meters work on Faraday's law of electromagnetic induction. It, in brief, states; when a conductor moves within a magnetic field, voltage is induced in it which is proportional to the velocity of conductor.

In this case the conductor is flowing media.

The equation is as below :
E = B.V.D

Where
E = Induced voltage (proportional to velocity)
B = Magneticflux density
V = Mean velocity of the media
D = Diameter of flow-sensor (distance between the sensing electrodes)

For a given size of flow tube & compatible amplifier the flux density 'B' is constant, the distance between the electrodes is constant. Hence, the induced voltage is proportional to the flowing media. Thus the meter can be calibrated in terms of volumetric flow rate by knowing the cross-sectional area of the tube. 

Principal Advantages

• Robust, rugged, welded steel/stainless steel construction withstanding to IP68.
• Very much suitable for submerged or buried application.
• No Pressure Drop across the sensor, being full bore construction.
• Measurement independent of un-dissolved solids.
• Long lasting Ebonite rubber lining gives long life of sensor,
• End connection flanges as per customer's Requirements. 

Applications
The flow meter can be used to measure various types of fluids which can be found across various industrial processes. The accurate readings of meter keeps the operator always alert about flow rates of Medias of process. 

Some of the application areas of meter:

• Effluent treatment plants
• Sewage treatment plant
• Water supply schemes
• Steel industry
• Sugar industry and distillery
• Pulp and paper
• Chemical and pharmaceutical
• Food and drug

Other Details:

• Operating Pressure: From DN 100 to DN 200 - PN 16, From DN 250 to DN 350 - PN 10
• Line Size: DN 10 to DN 350
• Flanges:  SS 316 / SS 316 L / SS 304.

Features:

• Highly Accurate and extremely Linear.
• Microvolt signal Proportional flow rate from the primary flow sensor
• Various types of Liner & Earth electrode, both options are available.
• Empty tube detection is also provided.

Description :  
Manas have now introduced a new type of Battery Operated Electromagnetic Flow meter series. This sensor works on Faraday’s law of electromagnetic induction. The new type of flow transmitter is SS1020. It is available with integral or remote version of transmitter.

Battery Operated Electromagnetic Flow meter is specifically designed where Electric supply is not available& accurate flow measurement is essential.    

Other Details:

• Coil Housing Material: CS PU Painted / SS304 / SS316
• Flanges Material: CS / SS316 / SS304 / SS316 L
• Flange Standard: DIN  / BS Flanges (As per requirement)
• Flow Velocity: 0.2m/s to 12m/s
• Meter Size: DN15 to DN350

Model Range:

Manas have now introduced a new type of primary flow sensor & smart flow transmitter in their electromagnetic flow- meter series. This sensor works on the Faraday's law of electromagnetic induction. The meter is true volume measuring meter. The measurement is independent of Viscosity. Density, Dissolved/Un-dissolved solids, pressure or temperature of the flowing liquid as long as it maintains certain minimum conductivity. Various types of Liner & Electrode materials are available as per application requirements. The new sensors are more compact in size & more sensitive. Earth ring or earth electrode, both options are available. Empty tube detection is also provided.  

Principle Of Operation  
The SROAT 1002 series electromagnetic flow meters work on Faraday's law of electromagnetic induction. It, in brief, states; when a conductor moves within a magnetic field, voltage is induced in it which is proportional to the velocity of conductor.

In this case the conductor is flowing media.
The equation is as below :
E = B.V.D
Where
E = Induced voltage (proportional to velocity)
B = Magneticflux density
V = Mean velocity of the media
D = Diameter of flow-sensor (distance between the sensing electrodes)

For a given size of flow tube & compatible amplifier the flux density 'B' is constant, the distance between the electrodes is constant. Hence, the induced voltage is proportional to the flowing media. Thus the meter can be calibrated in terms of volumetric flow rate by knowing the cross-sectional area of the tube. 

Principal Advantages:

• Robust, rugged, welded steel/stainless steel construction withstanding to IP68.
• Very much suitable for submerged or buried application.
• No Pressure Drop across the sensor, being full bore construction.
• Measurement independent of un-dissolved solids.
• Long lasting Ebonite rubber lining gives long life of sensor,
• End connection flanges as per customer's Requirements. 

Applications

The flow meter can be used to measure various types of fluids which can be found across various industrial processes. The accurate readings of meter keeps the operator always alert about flow rates of Medias of process. 

Some of the application areas of meter :

• Effluent treatment plants
• Sewage treatment plant
• Water supply schemes
• Steel industry
• Sugar industry and distillery
• Pulp and paper
• Chemical and pharmaceutical
• Food and drug. 

Other Details:

• Flange Material: MS/CS/SS 316/SS 304/SS 316 L
• Coil Housing Material: MS/Carbon Steel PU Painted/SS 304/SS 316
• Meter: DN 10 to DN 350

Introduction:

• Know your water consumption not just by assumption but by correct instrumentation.
• Jal-oagh provides the solution.
• We have introduced a new economical series of EMF, considering water as the most important utility in any industry.

Jal-Oagh 100, 300 Series Of EMF:

• These flow meters are dedicated for waste water management system, sewage & effluent water measurement. These flow meters are mainly categorized into two i.e. Threaded & Wafer type. Threaded is available from DN 25 to DN 65 i.e. Jal-Oagh 100 Series while Wafer is available from DN 50 to DN 200 i.e. Jal-oagh 300 Series.

Principle of Operation:

• The JAL-Oagh series of electromagnetic flow meters work on Faraday's law of electromagnetic induction. When a conductor moves within a magnetic field, voltage is induced in it which is proportional to the velocity of the conductor.

In this case the conductor is flowing media. The equation is as below:

E=B.v.D

where,

• E = Induced voltage [proportional to velocity]
• B = Magnetic flux density
• v = Mean velocity of the media
• d = distance between the sensing electrodes
• For a given size of flow tube & compatible amplifier the flux density 'B' is constant, the distance between the electrodes is constant.

Jal-oagh Application:

• Effluent Treatment: Untreated as well as Treated Effluent Water Measurement.
• Sewage Treatment: Waste water measurement, Sludge measurement etc.
• Water Supply Schemes :Raw water as well as treated water measurement.
• Boiler Feed Water Measurement.
• Chemical Industries: Measurement of acidic & alkaline chemicals & slurries

Specifications:

Introduction:

• The Manas make Insertion Type Electromagnetic flow meter, called SR1000i is an ideal solution for water flow measurement in large diameter pipes.
• Fairly good accuracy of measurement(typically ± 1% of flow rate) can be achieved with little care in installation of probe and transmitter. The electrical conductivity of liquid under measurement can be as low as 20 microsiemens / cm. Being insertion type, there is virtually no pressure loss.
• Most economical as compared to its counterpart in full bore measurement or ultrasonic measurement.

Line Size: DN200 to DN2000

Specifications:

 

Technical Details:

 

Manas manufacturers molasses flow meters. These flowmeters are specially designed for low flow and high viscosity liquids. These flow meters can work for very low conductivity fluids, which is another important point to note, as many electromagnetic flowmeters cannot handle low conductivity fluids.

Manas Microsystems is a leading supplier of Electromagnetic Flow Meters in India, recognized among the top manufacturers in the country. We offer a wide range of electromagnetic flowmeters designed to meet diverse user requirements, available in various sizes, materials, and liner options.
Electromagnetic Flow Meters are essential for accurately measuring the flow of conductive fluids. They are widely used for monitoring drinking water, wastewater, and other conductive or water-based liquids, including raw water and dirty liquids. These meters operate based on Faraday’s Law of Electromagnetic Induction. Our latest sensors are more compact and sensitive, offering options for either an earth ring or earth electrode. Additional features include empty tube detection, and the transmitter meets IP67 standards, while the sensor complies with IP68 standards.

Features:

• Full Stainless Steel Body
• End Connection in Union Coupling/tri-clover clamp
• Highly Accurate and extremely Linear
• Isolated 4-20 mA output Proportional to flow rate.
• Option of Pulse Output available.

Description:

• The Series SG-Sroat of Electromagnetic Flow Meters is specifically designed for measurement of food liquids like milk, cream, juices of various fruits, pharma liquids etc.
• It is available with integral or remote version of transmitter.
• The transmitter can have built-in or remote totalizer display. Suitable end connections of SMS Union or DIN Union or Tri-clover Clamp is given as per customer's requirements.
• Special models are available for mounting on Milk Tankers.

Specifications:

Technical Details: